Full Property Assessment
We walk the property with you, check your water meter, and listen to your description of the symptoms. This helps us choose the right electronic tools and focus our search.
Pinpoint hidden leaks fast with non-invasive acoustic and thermal technology
Electronic Leak Detection in Chula Vista You Can Count On
Electronic Leak Detection in Chula Vista finds hidden water leaks without tearing up your floors or yard. We use acoustic listening devices, thermal imaging cameras, and tracer gas detectors to pinpoint slab leaks, pinhole leaks, and pool leaks fast. Whether you're in Eastlake or Otay Ranch, our electronic leak detection service in Chula Vista saves you money on repairs and water bills.
Careful work. Honest options.
About this service
Electronic Leak Detection in Chula Vista Explained
Electronic Leak Detection in Chula Vista is a non-invasive process that uses acoustic listening devices, thermal imaging cameras, and tracer gas detectors to find hidden water leaks under slabs, inside walls, and underground. Instead of breaking concrete to find a leak, we listen for the distinct sound of pressurized water escaping a pipe, scan for temperature differences with infrared cameras, and inject a safe tracer gas to confirm the exact location. Most residential jobs take two to four hours from arrival to a marked leak point.
Chula Vista's mix of older homes near Third Avenue Village and newer construction in Otay Ranch means we see everything from corroded copper pipe in 1960s slabs to PEX tubing failures in recent builds. High water bills, warm spots on the floor, and the sound of running water when nothing is on are the calls we get most. If you need electronic leak detection near me, our team covers all of San Diego County with same-day appointments and 24/7 emergency response.
- ✓ No Unnecessary Demolition
- ✓ Lower Water Bills Fast
- ✓ Protect Your Foundation
- ✓ Same-Day Results You Can Trust
What's included
What Our Electronic Leak Detection Includes
Every inspection is comprehensive. We don't just find the leak; we document it so you can get it repaired efficiently. Here's what's included in a standard residential or commercial visit.
Acoustic and Thermal Scanning
We use acoustic listening devices on slabs and walls, plus a FLIR thermal imaging camera to detect temperature differences caused by leaking water. This combination finds most leaks without any digging.
Tracer Gas and Pressure Testing
For hard-to-find leaks, we inject a safe tracer gas into the line and use a detector to pinpoint the escape point. Pressure testing gauges confirm the leak rate and verify our findings.
Leak Marking and Documentation
Once confirmed, we mark the exact leak location with paint or tape. You receive a written report with thermal images, pressure readings, and our recommendations for repair.
Repair Coordination
We connect you with licensed C-36 plumbing contractors who can fix the leak using our findings. We're available to answer questions during the repair process.
How it works
What to Expect During Your Leak Inspection
You call (619) 943-1896 and describe what you're seeing: high bill, warm floor, sound of running water, or a wet spot that keeps coming back. We ask a few questions to narrow down whether it's a slab, pool, or plumbing leak, then schedule a same-day or next-morning visit. Most calls take under 10 minutes.
Our technician arrives in a marked truck, walks the property with you, and listens to the symptoms firsthand. We check your water meter, inspect visible piping, and note any moisture patterns. This takes 15 to 20 minutes and helps us choose the right electronic leak detection equipment for your situation.
We deploy acoustic listening devices on the slab or walls, scan with a FLIR thermal imaging camera, and pressurize the system with tracer gas if needed. Each method takes 20 to 40 minutes. We're looking for the exact spot where water is escaping, not just the general area.
Once two or more methods agree, we mark the leak point with paint or tape and show you exactly where it is. You get a written summary with our findings, including pressure readings and thermal images. This documentation is what your repair plumber needs to fix it right the first time.
If you already have a plumber, we hand off our findings. If you need one, we connect you with licensed C-36 plumbing contractors we've worked with across San Diego County. Either way, we're available to answer questions during the repair. Most repairs are scheduled within 24 to 48 hours of our inspection.
STEP 01Phone Assessment
You call (619) 943-1896 and describe what you're seeing: high bill, warm floor, sound of running water, or a wet spot that keeps coming back. We ask a few questions to narrow down whether it's a slab, pool, or plumbing leak, then schedule a same-day or next-morning visit. Most calls take under 10 minutes.
Tools & methods
Tools and Methods We Use
Acoustic Listening Devices
We place these on slabs, walls, and floors to listen for the sound of pressurized water escaping a pipe. They're our primary tool for finding hidden leaks.
FLIR Thermal Imaging Cameras
Infrared cameras detect temperature differences caused by leaking water. We use them to scan large areas quickly and narrow down the leak location.
Tracer Gas Detectors
For hard-to-find leaks, we inject a safe tracer gas into the line and use a detector to pinpoint the escape point. Ideal for pool and underground lines.
Pressure Testing Gauges
We use these to confirm whether a line is leaking and measure the leak rate. Pressure testing verifies our electronic findings.
Video Pipe Inspection Cameras
We run a camera through your pipes to see cracks, root intrusion, and blockages. This is often paired with electronic leak detection for a complete picture.
Moisture Meters
These measure moisture levels in walls, floors, and ceilings. We use them to map where water has traveled and assess potential damage.
Real results
Before and after.
Electronic Leak Detection
Slab Leak in Otay Ranch Home
A homeowner in Otay Ranch noticed a warm spot on the kitchen floor and a water bill that jumped by $180. Two plumbers couldn't find the leak without breaking concrete. The family was facing a $4,000 repair estimate with no guarantee.
After: We used thermal imaging and acoustic listening to pinpoint a hot water line leak under the slab within 90 minutes. We marked the exact spot. The plumber made one small access hole and repaired the pipe for $800. The water bill returned to normal the next month.
Book this service →
Electronic Leak Detection
Pool Leak in Eastlake
An Eastlake homeowner was losing two inches of water per day from their pool. The pool company suspected a leak but couldn't find it. The homeowner was adding water every other day and worried about the pool shell cracking.
After: We pressure tested the pool plumbing and used acoustic listening to find a leak in the return line. We provided a detailed report. The pool repair company fixed it in one day for $1,200. The pool stopped losing water immediately.
Book this service →
Electronic Leak Detection
High Water Bill in Third Avenue Village
A homeowner near Third Avenue Village received a $350 water bill, triple the normal amount. No visible leaks. A plumber suggested replacing the main line at a cost of $3,500.
After: We used acoustic listening devices and tracer gas to find a pinhole leak in a copper pipe under the front yard. We marked the spot. The plumber repaired the pipe for $450. The next water bill was back to $110.
Book this service → Problems we solve
Problems We Solve with Electronic Leak Detection
Hidden leaks cause more damage the longer they go undetected. Here are the most common problems we solve for Chula Vista homeowners and businesses.
Ask a pro →High water bills with no visible leak
We use acoustic listening devices and pressure testing to find the leak underground or under your slab. Once located, we mark it so your plumber can repair it. Most customers see their water bill return to normal within one billing cycle.
Warm spots on the floor or unexplained moisture
Our thermal imaging cameras detect the temperature difference caused by the leaking hot water line. We confirm with acoustic listening, then mark the spot. Your plumber can repair it with minimal concrete removal.
Pool losing water faster than normal evaporation
We use pressure testing and acoustic listening to find leaks in the pool shell, skimmer line, or return lines. We provide a written report so your pool repair company can fix it without guesswork.
Sound of running water when everything is off
We systematically check all fixtures and lines with electronic tools. Acoustic devices pick up the sound of the leak, and we trace it to the exact source. You get a clear answer and a plan for repair.
Proof you can check
Licensed, Certified, and Trusted
- California Contractor License (C-36 Plumbing) · California State License Board
- IAPMO Certification · International Association of Plumbing and Mechanical Officials
- Backflow Prevention Certification · San Diego County Health Department
- OSHA Safety Compliance · Occupational Safety and Health Administration
- EPA WaterSense Partner · U.S. Environmental Protection Agency
Most residential inspections run $250 to $450 in 2026, depending on whether it's a slab, pool, or underground line. Commercial properties and multi-unit buildings start around $500. The price includes the full inspection, two-method verification, and a written report with photos. If we can't find the leak, you don't pay.
The best service uses multiple technologies, not just one. We combine acoustic listening devices, FLIR thermal imaging cameras, and tracer gas detectors to confirm every leak. That's why we can mark the exact spot within inches. Ask any company you call which tools they use and whether they verify with a second method.
Yes, when it's done right. Our two-method verification process means we don't mark a spot until acoustic and thermal readings agree, or tracer gas confirms the path. That gives us over 95% accuracy on slab and pool leaks. The technology is only as good as the technician interpreting it.
We do. Pool leaks are common in Chula Vista, especially in older pools with original plumbing. We use pressure testing and acoustic listening to find leaks in the shell, skimmer line, or return lines. Most pool inspections take two to three hours and cost $300 to $500, including a written report for your pool repair company.
Ready when you are
Schedule Your Electronic Leak Detection in Chula Vista Today
Don't let a hidden leak drive up your water bill or damage your foundation. Call (619) 943-1896 now and we'll schedule a same-day inspection. Licensed, insured, and trusted across San Diego County.
Book Inspection (619) 943-1896 →
Request an appointment
Call for leak detection in Chula Vista
Reach us at (619) 943-1896 any time, day or night. Our emergency line is staffed 24/7, and regular appointments run Monday through Friday from 8 a.m. to 6 p.m. If you leave a message after hours, we call back within 15 minutes. We serve all of Chula Vista and the surrounding San Diego County area.
Call anytime(619) 943-1896Email the office[email protected]
Office hoursOpen 24 hours · 7 days a week