Full System Pressure Test
We connect pressure testing gauges to your main line and isolate sections to check for pressure drops. This tells us if the leak is in the supply or drain system.
Water Leak Detection in Chula Vista is the fastest way to stop hidden water loss before it damages your slab, walls, or landscaping. Our licensed technicians use acoustic listening devices, thermal imaging cameras, and pressure testing gauges to pinpoint leaks without tearing up your whole floor. Whether you're in Otay Ranch or Downtown Chula Vista, we find the source and give you a clear repair plan.

Water Leak Detection in Chula Vista is a diagnostic service that locates hidden water leaks in pipes, slabs, pools, and irrigation lines using non-invasive tools. We start with a pressure test on your main line, then scan walls and floors with infrared cameras and acoustic listening devices. If the leak is under a slab, we use pipe locators and video pipe inspection cameras to map the line before we mark the repair area.
Chula Vista's mix of older copper pipe and newer PEX tubing means leaks show up in different ways. Homes near Third Avenue Village often have corroded pipes from decades of hard water, while newer builds in Eastlake see pinhole leaks from shifting soil. If you've noticed a spike in your water bill or a warm spot on the floor, a professional water leak detection Chula Vista inspection can save you thousands in foundation repairs.
Every inspection includes a comprehensive evaluation of your plumbing system. We check supply lines, drain lines, fixtures, and appliances. Here's what you get.
We connect pressure testing gauges to your main line and isolate sections to check for pressure drops. This tells us if the leak is in the supply or drain system.
We use acoustic listening devices and infrared cameras to scan floors, walls, and ceilings. We mark the exact location of the leak with tape.
If needed, we run a video pipe inspection camera through your drain lines to check for cracks, root intrusion, or blockages. You get a digital recording.
We use moisture meters to map the extent of water intrusion in walls and floors. This helps us determine the source and plan repairs.
We provide a written report with our findings, photos, and a recommended repair plan. We'll also give you an upfront quote for any repairs you want us to handle.
When you call, we ask about your water bill, visible moisture, and any recent plumbing work. This helps us bring the right tools. We'll schedule a same-day or next-day visit, depending on urgency.
We connect pressure testing gauges to your main water line and isolate sections to see if the system holds pressure. A drop indicates a leak. This step takes 15 to 20 minutes and tells us whether the leak is in the supply line or drain line.
Using acoustic listening devices and infrared cameras, we scan floors, walls, and ceilings. Leaks emit a distinct sound and temperature signature. We mark the exact spot with tape so you can see where the problem is.
If the leak is in a drain or sewer line, we run a video pipe inspection camera through the pipe. This shows us root intrusion, cracks, or blockages. You get a digital recording of the inspection.
We summarize our findings, show you the evidence, and provide a written repair plan. If you want us to handle the repair, we can schedule it immediately. Most repairs take one to two days.
When you call, we ask about your water bill, visible moisture, and any recent plumbing work. This helps us bring the right tools. We'll schedule a same-day or next-day visit, depending on urgency.
Amplify the sound of escaping water to pinpoint leaks in pipes and slabs. We use Gutermann and Sewerin models.
Detect temperature differences caused by leaks. We use FLIR cameras to scan walls and floors without demolition.
Introduce a safe gas into the line and detect where it escapes. Ideal for hard-to-find leaks in gas lines and underground pipes.
Inspect the inside of pipes for cracks, root intrusion, and blockages. We use RIDGID and General Pipe Cleaners equipment.
Check if your plumbing system holds pressure. A drop indicates a leak. We use Milwaukee and RectorSeal gauges.
Measure moisture levels in walls and floors to map water intrusion and find hidden leaks.

A homeowner in Eastlake noticed a warm spot on their kitchen floor and a $200 spike in their water bill. They feared a slab leak and the cost of breaking the floor.
After: We used thermal imaging to pinpoint the leak within 6 inches. The repair required only a 2-foot section of concrete to be opened. The leak was fixed with a copper pipe repair, and the water bill returned to normal.
Book this service →
A pool in Otay Ranch was losing 2 inches of water per week. The owner was adding water daily and spending $150 a month on chemicals.
After: We pressure-tested the pool lines and found a cracked pipe under the deck. We repaired the pipe and refilled the pool. The owner now saves $150 a month and the pool stays full.
Book this service →
A historic home near Third Avenue Village had a musty smell in the hallway. The owner suspected a hidden leak but didn't want to tear up the walls.
After: We used acoustic listening devices to find a pinhole leak in a copper pipe behind the wall. We marked the spot, and the repair required only a 1-foot square of drywall to be removed. The leak was fixed with a pipe repair clamp.
Book this service →From slab leaks to pool leaks, we've seen it all. Here are the most common issues we fix for Chula Vista homeowners.
Ask a pro →We use acoustic and thermal tools to find the leak fast. Once located, we provide a repair plan to stop the waste and lower your bill.
Our thermal imaging cameras pinpoint the leak without breaking the slab. We mark the spot and recommend the best repair method, often a pipe repair clamp or rerouting.
We use moisture meters and infrared cameras to find the leak source. We then provide a plan to fix the leak and dry the area, preventing mold growth.
We pressure-test pool lines and use dye tests to find leaks in the shell or plumbing. We fix the leak and restore your pool's efficiency.
Most residential water leak detection in Chula Vista costs between $250 and $450, depending on the complexity and location of the leak. Commercial or slab leaks may run $500 to $800. We provide a flat-rate quote before we start, so you know exactly what you'll pay. Call us at (619) 943-1896 for a free phone estimate.
The best service uses multiple technologies: acoustic listening, thermal imaging, and pressure testing. We combine all three to pinpoint leaks with 99% accuracy. Our technicians are licensed and carry IAPMO certification. We also offer a satisfaction guarantee: if we can't find the leak, you don't pay.
Yes. We use non-invasive tools like infrared cameras and acoustic sensors to detect leaks under slabs and behind walls without demolition. In most cases, we can pinpoint the leak within a few inches. We only recommend opening the floor when it's time to repair, and we mark the exact spot to minimize cutting.
If you have an active leak, you need both. Detection finds the source; repair fixes it. We handle detection and can recommend a trusted repair specialist. Sometimes a simple pipe repair clamp or epoxy resin patch solves the problem. We'll advise you on the most cost-effective solution.
Don't let a hidden leak damage your home. Call Leak Detection Chula Vista at (619) 943-1896 for same-day service. We're licensed, insured, and ready to help.
Book Inspection (619) 943-1896 →Reach us at (619) 943-1896 any time, day or night. Our emergency line is staffed 24/7, and regular appointments run Monday through Friday from 8 a.m. to 6 p.m. If you leave a message after hours, we call back within 15 minutes. We serve all of Chula Vista and the surrounding San Diego County area.